GENERAL GUIDELINES
• Follow handling instructions printed on the Safety label of FIBC.
• Ensure FIBC is compatible and produced as per the filling product. (Whether Edible/ Non- edible or hazardous, etc.).
• All applicable regulations and safety requirements should be followed.
• Always consult your manufacturer/supplier regarding Technical Details before buying
.
• Protect the FIBCs from rain and prolonged sunlight, harmful UV rays, and inclement weather.
• Do dispose of FIBCs in accordance with ecological requirements.
INSTRUCTIONS FOR FILLING AND DISCHARGING FIBCs
• Ensure the Discharge Spout is correctly closed prior to filling of FIBC.
• Filling Spout / Duffle of FIBC should be closed as per FIBC manufacturer's instruction.
• Never exceed SWL( Safe Working Load) requirement as specified for a particular FIBC.
• Environment should be favorable for filling and emptying FIBC. Eg- Electrostatic concerns in flammable or explosive environments.
• Ensure that the filled FIBC is stable.
Take appropriate measures in regard to dust control.
• People around should never stand under a suspended FIBC.
• Never suspend/ discharge FIBC using a single or fewer lift loop, sleeves, etc.
INSTRUCTIONS FOR HANDLING FIBC WITH FORKLIFT, CRANE OR HOIST
• The lift truck must be in a good condition and sufficient to support the filled FIBC.
• The driver should maintain a clear line of sight while transporting a filled FIBC.
• The angle of the mast should be aligned/ titled to an appropriately.
• Ensure that the edges of the forklift tines are smooth or protected.
• Use lifting gear of sufficient capacity to take the suspended load.
• The forklift tines must be adjusted to a correct width to prevent damaging lateral forces.
• Forklift must be stopped prior to raising or lowering the FIBC.
• Never subject an FIBC to sudden lifts / stops.
Describe your product or give more information.
INSTRUCTIONS FOR FIBC WITH LINERS
• Liners should be Pre-Inflated before filling for better results.
• Extend open liners from filling and discharge Spout while filling or emptying respectively.
• Liners must be attached to FIBC properly so they do not come out/loose hold during discharge procedure.
• Tie off liners with spouts as instructed by the manufacturer.
INSTRUCTIONS FOR STORAGE AND TRANSPORTATION OF FIBC
• Pallets used for storage and transportation of FIBC should be certified.
• Pallets should be free of nails or protrusions.
• Pallets should be of appropriate size and FIBC bags should not exceed out of it.
• Never remove or repair a damaged bag without first removing all bags stacked on top.
• Bags must be stacked against two stable walls of sufficient strength.
• Storage of filled bags in pyramid structure is suitable.
• Storage Facility or Warehouse must be free of water or moisture